采油废水中多环芳烃的生态风险评价

先利用C-18固相萃取小柱富集大港油田港东联合处理站污水处理站的采油废水中16种多环芳烃(PAHs,即萘、苊烯、苊、芴、菲、蒽、荧蒽、芘、、苯并[a]蒽、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、茚并[1,2,3-cd]芘、二苯并[a,h]蒽和苯并[g,h,i]苝),再用气相色谱/质谱(GC/MS)分析测定其浓度,以评价PAHs的去除率和生态风险。结果表明:(1)采油废水经处理后,COD、石油类去除率分别达到82.27%、91.06%;外排水COD、石油类达到《污水综合排放标准》(GB 8978—1996)一级标准要求,优于中国采油废水处理的一般水平。(2)采油废水主要以2、3环的PAHs为主,约占总量的93%以上。(3)苯并[a]芘超过《地表水环境质量标准》(GB 3838—2002)中限值。(4)处理前的采油废水中蒽、菲和苯并[a]芘具有一定的生态风险;处理后的外排水中萘、蒽、菲、荧蒽、苯并[a]芘的暴露浓度(PEC)/预测无效应浓度(PNEC)均小于1,目前尚未对环境造成威胁。但是8种PAHs(苊烯和苯并类PAHs除外)总和表现出较大的毒性,需要引起重视。     

Cation exchange in a glacial till drumlin at a road salt storage facility

At a former wood preservation plant severely contaminated with coal tar oil, in situ bulk attenuation and biodegradation rate constants for several monoaromatic (BTEX) and polyaromatic hydrocarbons (PAH) were determined using (1) classical first order decay models, (2) Michaelis–Menten degradation kinetics (MM), and (3) stable carbon isotopes, for o-xylene and naphthalene. The first order bulk attenuation rate constant for o-xylene was calculated to be 0.0025 d^− 1 and a novel stable isotope-based first order model, which also accounted for the respective redox conditions, resulted in a slightly smaller biodegradation rate constant of 0.0019 d^− 1. Based on MM-kinetics, the o-xylene concentration decreased with a maximum rate of k_max = 0.1 µg/L/d. The bulk attenuation rate constant of naphthalene retrieved from the classical first order decay model was 0.0038 d^− 1. The stable isotope-based biodegradation rate constant of 0.0027 d^− 1 was smaller in the reduced zone, while residual naphthalene in the oxic part of the plume further downgradient was degraded at a higher rate of 0.0038 d^− 1. With MM-kinetics a maximum degradation rate of k_max = 12 µg/L/d was determined. Although best fits were obtained by MM-kinetics, we consider the carbon stable isotope-based approach more appropriate as it is specific for biodegradation (not overall attenuation) and at the same time accounts for the dominant electron-accepting process. For o-xylene a field based isotope enrichment factor ε_field of − 1.4 could be determined using the Rayleigh model, which closely matched values from laboratory studies of o-xylene degradation under sulfate-reducing conditions.     

Desorption of polycyclic aromatic hydrocarbons from field-contaminated soil to a two-dimensional hydrophobic surface before and after bioremediation

This study investigated environmental distributions and production mechanisms of chlorinated polycyclic aromatic hydrocarbons (Cl-PAHs) in the sediments from some tidal flats located in Asia. Cl-PAHs were found in sediments taken from Arao tidal flat, Kikuchigawa River and Shirakawa River. The range of ∑Cl-PAHs was from 25.5 to 483 pg g⁻¹ for Kikuchigawa River and Arao tidal flat, respectively.Concentrations of PAHs and Cl-PAHs showed no significant correlations (r = 0.134). This result suggests that the origins of these compounds differ. In the identified Cl-PAH isomers, the most abundant Cl-PAH isomer was 9,10-dichloroanthracene (9,10-di-Cl-ANT) in the three sites. In general, concentrations of Cl-ANTs in the coastal environment are about 3-5 orders of magnitude lower than those of anthracene (ANT). However, concentration ratios between Cl-ANTs and ANT (Cl-ANTs/ANT) in the sediments ranged from 4.1% to 24.6%. This result indicated that Cl-PAHs were not generated under industrial processes but the high concentration ratios have resulted from the contribution of photochemical production of Cl-ANTs in the sediments because ANT is known to have high photochemical reactivity.For examining this phenomenon, ANT adsorbed onto glass beads was irradiated with UV under the mimicked field conditions of tidal flats. As a result, it was noticed that, while chlorinated derivatives were negligible in a light-controlled group, production of 2-Cl-ANT, 9-Cl-ANT and 9,10-diCl-ANT on the irradiated surface were found in this study. These results suggest that photochemical reaction of PAHs can be a potential source of the occurrence of Cl-PAHs in the coastal environment.     

西安市大气中多环芳烃的季节变化及健康风险评价

对西安市2009年6月-2010年5月空气中的总悬浮颗粒（TSP）和气态样品进行了连续采样，利用GC—MS对16种PAHs进行分析。∑PAHs浓度（气相＋颗粒相）范围为39．93～1032．46ng／m^3，平均值为197．34ng／m^3；其中，冬季大气中∑PAHs浓度最大，相对浓度的范围为31．21％～72．98％，而夏季的浓度最小；检测出16种2～6环的PAHs，其中以3—4环为主。利用特征分子比值法和因子分析进行源解析，发现研究区PAHs的主要来源为燃煤和机动车尾气排放。通过苯并（a）芘（BaP）等效毒性（BEQ）和苯并（a）芘等效致癌浓度（BaPE）进行健康风险评价，结果显示，西安大气中PAHs的毒性具有明显的季节差异，特别是秋季和冬季大气中PAHs对人类的健康存在较大的潜在威胁。     

Assessment of honey contamination with polycyclic aromatic hydrocarbons

The aim of this study was to assess honey contamination by polycyclic aromatic hydrocarbons. Six species of honey were examined, as well as rape blossom and soil from villages P?czerzyno and Przybys?aw in West Pomerania, Poland. The instrumental analysis was performed using a HP 6890 gas chromatograph coupled to a HP 5973 mass spectrometer with selected ion monitoring (SIM). Quantification was done by gas chromatography-mass spectrometry (GC-MS) using perdeuterated internal standards. Both soil samples showed high levels of all 23 PAHs, whereas honey contained mostly non-carcinogenic PAHs of low molecular weight. The most contaminated honey from P?czerzyno contained 0.24 μg kg-1 benzo[a]pyrene. Moreover, despite low contamination of honey, a positive correlation was found between PAH content in honey, blossom and soil.     

白腐真菌修复多环芳烃污染土壤及其降解机理的研究进展

介绍了白腐真菌对多环芳烃(PAHs)的代谢途径、降解机理,阐述了白腐真菌修复PAHs污染土壤的影响因素和生态效应,并提出了提高白腐真菌修复效率的措施.白腐真菌主要通过分泌木质素降解酶系(木质家过氧化物酶、锰过氧化物酶和漆酶)来降解PAHs,这些胞外酶可通过开环作用把PAHs代谢成为水溶性较强的醌类中间产物,再由其他微生物降解这些中间产物直至矿化.在白腐真菌的培养过程中.通过对环境因素及营养条件(如温度、pH值、C/N比、微量元素和转速)的优化可提高胞外酶产量.在修复PAHs污染土壤过程中,生物竞争、营养条件和环境因素等均会影响白腐真菌的修复效果.同时,归纳总结了改善白腐真菌修复效果的一些措施,如真菌-细菌联合修复、添加适当的培养基质、添加表面活性剂、直接施用酶制剂和改善营养条件等.     

GC/MS法测定润滑油基础油中多环芳烃

对润滑油基础油中多环芳烃的气相色谱/质谱(GC/MS)测定方法进行了研究,探讨了样品的提取,固相萃取柱净化等前处理方法,同时也对仪器测定条件进行了优化.结果表明,在检测润滑油基础油中多环芳烃时,经优化的GC/MS法的加标回收率和精密度均达到较满意的水平.     

底泥中多环芳烃(PAHs)提取方法评析

总结了底泥中多环芳烃(PAHs)提取的处理流程和国内外多种提取方法,比较了几种在我国较为常用的提取方法的效率.同时还提出了PAHs分离纯化的方法和步骤,并指出了提取过程中影响实验回收率的几个因素.     

GC-PID联用直接测定大气中痕量烃类化合物

作者把气相色谱仪(GC)与自行研制的光离子化检测器(PID)联用,实现了大气中痕量烃类化合物的直接测定,给出了仪器的构成和性能指标及测量结果.     

Effects of thermal desorption on the composition of two coking plant soils: impact on solvent extractable organic compounds and metal bioavailability

To evaluate the efficiency and the influence of thermal desorption on the soil organic compartment, contaminated soils from coking plant sites (NM and H) were compared to their counterparts treated with thermodesorption. The extractable organic matter, and the metal content and distribution with soil compartments were studied.In both thermodesorbed soils, PAH (polycyclic aromatic hydrocarbon) degradation exceeded 90%. However, the thermal desorption led not only to a volatilization of the organic compounds but also to the condensation of extractable organic matter.The treatments only affected the Fe and Zn distribution within the more stable fractions, whereas the organic compound degradation did not affect their mobility and availability.